 |
||
|
MAE provides a variety of standard design
vessels to handle flow rates between 10 gpm to 2,500 gpm at pressure ratings
ranging from 75 to 600 psi. For special system requirements, our engineers will
custom design a system. Standard CM and UF design filter vessels are
constructed from the highest quality carbon steel, 304 or 316 stainless steel
and conform to ASME code standards.
|
||
Inline filter vessels come in two standards
sizes 4.5" ID x 16" L, UF1-30 and 4.5" ID x 27.5 L, UF1-65. Both sizes come in
two different designs (Band Clamp & Swing Bolt) and three different
pressure ratings. All cover-sealing designs are easily accessible and don't
require special tools to release the cover seal in order to access the filter
bag or basket.
|
||
All 90 and 180 style filter bag/strainer
vessels are designed with a recessed basket, a volume displacer permanently
welded to the top cover, and a 304 stainless steel wire mesh retainer basket.
Wire mesh baskets increase available filtration surface area by 30% compared to
a perforated retainer basket. We offer our 90 and 180 size vessels in two
different styles, UF and CQX, and a variety of pressure ratings with 150 psi
being standard.
|
||
Multi-bag/strainer vessels offer large
surface areas capable of handling up to 4800 gpm in a single housing.
Increasing surface area allows for longer processing time prior to filter
change-out. Containing anywhere from 2 to 24 baskets in a single vessel, our
standard Side-inlet Side-outlet offers the greatest flexibility and doesn't
require a platform to be built in order to chang-out or clean the filter
elements or strainers (refer to diagram and charts).
|
||
MAE offers a full line of cartridge vessels.
These systems are available in a variety of sizes capable of holding between 1
and 200 single or quadruple length string wound, molded or pleated cartridges.
Our cartridge vessels are manufactured to the same high quality standards as
our filter bag vessels.
|
||